Journal Entry
 |
Visit John Moore's Profile. Subscribe to this Journal: 
What is RSS?
There are 35 entries in this Journal. Status: Member Location: Clifton Park, NY, USA |
|
Head Work
Created on 2007-02-11 10:31:09
While my engine was apart I sent the head to Sean Brown for a port and polish job as well as having the intake port matched and polished. A total of three MGBexperience members sent him heads for work and he did an excellent write up on the process on his website. www.flowspeed.com Definitely check it out. I also got my block back last week, I had it cleaned and the cylinder bores honed. It looks like the original rings never set properly. I'm attributing this to using too much assembly lube during the rebuild. ROOKIE ERROR! I was lucky to be able to find a set of .030 Deves Rings.
Hopefully, next week, I'll get around to putting it back together.
ps- oh yeah! I had Jeff rebush, recurve and install a petronix flame thrower in my Eurospec 45D! woo hoo!
Hopefully, next week, I'll get around to putting it back together.
ps- oh yeah! I had Jeff rebush, recurve and install a petronix flame thrower in my Eurospec 45D! woo hoo!
Click the thumbnail to view image:
Cylinder Head just arrived from Sean!
Cylinder Head just arrived from Sean!
Summary of Previous Journal Entries
Showing previous 10 journal entries:
| Title | Date | #Pic | #Cmt | Excerpt |
|---|---|---|---|---|
| My New B! | 2007-01-13 | 6 | 1 | I thought I might go backwards a bit.... I bought my B on April 6, 2003 from a guy in Northern New Jersey. After being into Land Rovers for some time, I got the i... |
| Engine Apart Again | 2007-01-11 | 5 | Towards the end of the 2006 season, I really started to burn oil, approximately 1 qt per 300 miles. My thought was either bad valve seals or the one piece oil control rings I had... | |
| MG Summer / 2006 | 2006-11-19 | 10 | After getting my B back on the road earlier this year, I've had an incredible MGB Summer! I've driven it everywhere logging an estimated 8000 miles. (my odo quit the last two mon... | |
| Daytons!!! | 2006-06-17 | 6 | Today I installed new hubs on all four corners and new Dayton Wire Wheels! They are beautiful and handle even better. I feel like the car is transformed. No more w... | |
| On The Road Again .... Finally!!! | 2006-05-05 | 6 | 1 | Woo hoo! Last night I put in the seats and belts and cleaned the wire wheels up a bit. She's insured and licened and ON THE ROAD AGAIN! The only thing left to do is install the chr... |
| Floor Pans | 2006-04-23 | 6 | This is out of order but here is how I did my floor pans. From 6/6/05 I'm making good progress. I got the heel board extensions welded in. I followed ... | |
| MKII Console & Hood | 2006-04-11 | 6 | 1 | When I purchased my B, the interior was completely stripped so I had no direct point of reference as to how it was done a the factory. Originally, I sat my center console on top o... |
| Truck Bed Liner | 2006-04-06 | 5 | 2 | I did this awhile ago (right before paint), but I get so many questions about it, I thought I would create a journal entry. I had heard about Hot Rod guys using bed ... |
| Carpet And Panels | 2006-04-02 | 5 | 1 | Over the last two nights I got the carpet and most of the panels in. It pretty straight forward, nothing tricky. Tho' I did build up the transmission hump a bit with duct insulatio... |
| Sound Deadener/ Floor Heat Shield | 2006-03-26 | 4 | I didn't get much garage time this weekend, but I did manage to install sound deadener/heat shield on my floors and cockpit. After reading... http://www.sounddeadene... |
The contents of this journal entry (including entry images) are released
under the terms of the Creative Commons License unless otherwise noted.
under the terms of the Creative Commons License unless otherwise noted.
This page last modified December 01 2007 20:50:32 pm
Add a comment to this journal entry:
Please sign in if you already have an account or register now to enable this feature.